Dual Heads Cutter Plotter – Watch These Particular Scientifically Revolutionary Dual Heads Cutter Plotters.

Cutting plotters are mostly made for cutting relatively thin flexible media like vinyl. Typical applications include vinyl lettering, as well as cutting out pre-printed stickers, decals and even some short-run labelling applications. They’re considerably less expensive than a cutting table and really should easily purchase themselves in the relatively limited time frame. Obviously fabric cutter needs to be able to cutting through flexible substrates for example self adhesive vinyl. But they should also offer options for example perforation and cutting only part-way by way of a material to make a tear-off line.

It’s important to check the cutting force and that any prospective plotter are equipped for the particular substrates that you wish to use. Otherwise, choosing a plotter is principally an instance of balancing its cost versus the cutting speed and the number of work which you have. There’s a decent variety of cutting plotters available so rather than experience every one of them we’ll highlight probably the most common as well as the features you may typically expect from the plotters.

Mutoh has also seriously considered the print and cut workflow, which can be essential if you’re going in order to place the prints via a cutter with accurate registration. The dual heads vinyl cutter have FlexiStarter software for adding cutting paths to design files. It can also produce a reference mark for your ValueCut machines to locate the design. Mark Rammant, product specialist for Mutoh, adds: “You can also create marks in a graphic design software like Illustrator. You are able to import these into the FlexiStarter software and it will automatically put these contour lines through employing a chosen spot colour and swatch name by recognizing this spot colour as cutting data.” He states that the ValueCut plotters may also recognize cut paths off their programs like Onyx RIP, that also supports print and cut workflows. Summa also has several vinyl cutting options. The regular Summacut can be found in 142cm and 164cm widths, whilst the newer D140 FX, only can be purchased in the 142cm size. This could cut at around 113cm per second with as much as 3G acceleration or higher to 400g knife pressure.

Summa also offers the greater number of heavy-duty S class, designed for high volume industrial work. These are available in two series: the D-series utilize a drag knife and may cut with a force up to 400g; the T series works with a true tangential knife and may apply around 600g cutting force. They’re offered in four sizes with cutting widths of 74cm, 120cm, 135cm and 158cm. They are able to cut at as much as 1000mm per second with optional consume rollers and media racks designed for the most important two sizes. All 37dexhpky systems utilize an automated optical system that picks up marks on the print to align the cutting blades and all support barcodes. There’s also an optional camera system for your S2 T-series. Mimaki has got the CG FX series, available in 760mm, 1300mm and 1600mm widths. They’re designed for vinyl work and may take media around .25mm thick. They could apply around 400g of pressure and cut at approximately 100cm per second. There’s an optical sensor to detect registration marks on the print and they come provided with camera cutting plotter plug-in this works together with either CorelDraw or Adobe Illustrator. Mimaki also sells the CG-SRIII series, also available in three sizes, with cutting widths approximately 606mm, 1070mm and 1370mm. These may bring 500g of pressure to deal with but only cut at around 70cm per second.